Experimenting with I2C on #PinePhone
Probing the #LoRa Backplate for #PinePhone ... With Bus Pirate 🤔
#LoRa Backplate for #PinePhone @PINE64 is ingenious! Semtech SX1262 with an I2C-To-SPI Bridge (ATtiny84)
Probing the #PinePhone #LoRa Backplate ... Will this work? 🤔
@lupyuen I would solder bare thin wires (copper strands) to the pads, snip them off at a few millimetres, then use ez hooks to connect.
@modrobert Yep that should work 👍
Follow
@lupyuen @modrobert Yes, and I even loop the thin wire back to the pad, so that the hook can't slid off. If pad is too tiny, then loop back the end and solder to itself.
